So, your Greenworks string trimmer is running low on line, leaving you with patchy results and frustrating yard work. Don't worry, replacing the trimmer line is a straightforward process. This guide will walk you through the steps, regardless of your Greenworks model. We'll cover everything from choosing the right replacement line to tackling common issues. Let's get started!
Identifying Your Greenworks Model
Before you begin, it's crucial to identify your specific Greenworks string trimmer model. This information is usually found on a sticker located on the trimmer itself. Knowing your model helps ensure you choose the correct replacement string and follow the appropriate instructions. Many Greenworks models share similar processes, but slight variations might exist.
Choosing the Right Replacement String
Greenworks trimmers typically use either .065-inch or .080-inch diameter line. Check your trimmer's manual or the label on the spool to confirm the correct size. Using the wrong size can damage your trimmer or lead to poor performance.
Pro Tip: While the recommended line diameter is crucial, you can also consider the type of line. Some lines are designed for increased durability, while others prioritize quieter operation or better cutting performance.
Tools You'll Need
Before you start, gather these essential tools:
- Replacement trimmer line: Make sure it's the correct diameter and length.
- Screwdriver (likely Phillips head): This is usually needed to access the trimmer head.
- Scissors or wire cutters: To cut the line to the proper length.
- Gloves (optional): To protect your hands.
Step-by-Step Guide to Replacing Greenworks Trimmer Line
The exact steps might vary slightly depending on your specific Greenworks model, but the general process remains consistent.
Step 1: Unplug the Trimmer: Safety first! Always unplug your Greenworks string trimmer from the power source before performing any maintenance.
Step 2: Access the Spool: This usually involves:
- Unscrewing the trimmer head: Locate the head and unscrew it counter-clockwise.
- Removing the spool cover: Some models require removing a cover to access the spool.
Step 3: Remove the Old Line: Carefully remove the old spool of line.
Step 4: Loading the New Line:
- Wind the new line: Wind the new line onto the spool, following the instructions on the spool or your trimmer's manual. Ensure the line is evenly wound and not tangled.
- Insert the line into the holes: Thread the new line through the appropriate guides and slots in the spool and the trimmer head. Again, your specific Greenworks model will determine the exact method.
Step 5: Reassemble the Trimmer: Carefully replace the spool, cover and head, ensuring everything is securely fastened.
Step 6: Test the Trimmer: Plug in your Greenworks string trimmer and test the line feed mechanism. You should be able to extend the line by tapping the trimmer head on the ground or using the line advance mechanism.
Troubleshooting Common Issues
- Line won't feed: Ensure the line is properly wound and threaded through all the guides and slots. Double-check that the spool is correctly seated in the trimmer head.
- Line breaks easily: You might be using the wrong diameter line, or the line itself is of inferior quality. Try using a more durable line.
- Difficulty unscrewing the trimmer head: Apply moderate pressure; if it's too difficult, refer to your owner’s manual or consider using penetrating oil to loosen any stubborn parts.
Maintaining Your Greenworks String Trimmer
Regular maintenance will extend the life of your Greenworks trimmer and ensure optimal performance. Remember to always check the line level and replace it as needed. Inspect the trimmer head and spool for wear and tear, replacing any damaged parts.
By following these steps and tips, you'll be able to easily replace the string on your Greenworks string trimmer, getting back to enjoying a well-maintained lawn. If you're still experiencing problems, consult your Greenworks owner's manual or contact customer support.
